Search results

Save that for last as that is unlikely the cause, especially if it was a new ECA that no one should have messed with before.

To make sure the wires weren't switched in the harness: The white/red wire (CAN +)from the ECA should go to the car's yellow/white CAN wire, and the white/black (CAN -) wire should go to the yellow/black.

Zeitronix has a config utility for the ECA called ZDL for changing the CAN settings in the module. If the settings are not what they are supposed to be, you could try reset them with that. I have never used it. https://www.zeitronix.com/zdl/ The PDF link in my previous post shows the module's...

I am talking about the LED inside the Zeitronix ECA. It will still blink even if the module isn't connected to the car's CAN bus and has nothing to do with diagnostic mode. If the LED is off, you are missing power or ground. If it is on solid, you are missing the signal from the sensor. If it...

Is the LED in the module blinking?

Have the windshield installer be very gentle with the front camera. Safelite in the US broke mine, then lied about it saying it wasn't working when I brought it in for the windshield replacement.

Worst was when Toyota dealer looked for a camera, none were in the US and none on the way. I had to open a Toyota cust complaint to get some action. Ins. knows and is looking for inconsistencies in the Safelite mgrs. lies to get Safelite to cover it with their installation warranty. I'm...

Sorry, long. I had a big crack due to a thrown rock in July and scheduled WS replacement at local Safelite through Ins. no deductible. Switched out the cloned ECU to stock to avoid anything they plug in that could lock the ECU, or if they took it to dealer for calibrate. Safelite replaced...

Thanks for the refund.

Black and polished were the normal higher price, but red showed a special Cyber Monday deal so I bit. It would feel better if someone were to acknowledge the pricing mistake as you probably would have done, instead of the B-and-S maneuver that was used as that gives me a 'feeling' about that vendor.

Placed an order on 11/28 for XPH SKU: PK2300WR Injen red power pack at the Cyber Monday offered price of $324.96 from the web site. Today I get an email from 'Pedro' saying that it is out of stock and cannot be reordered so refunding the money. Then I look at the XPH web site again, and they...

Visconti for Stage 2 Custom Flex - Paid Marshall at 5pm, John called me and sent me the starting tune at 11pm same day (midnight his time). After sending a log, I get either an adjusted tune or 'OK now log this' within 2 days. Tried other options for less, but Visconti does what he says - that's...

Took the 2021 in for an insurance windshield replacement at the local Safelite shop. They installed the glass OK, but couldn't recalibrate the camera. Their OBD tools can't communicate with or identify it. DTCs are showing CDC318 and CDC317 which both seem to say "the camera is not sending...

When you loosen the clamp at the turbo, don't push on the bolt as you unscrew it. The nut is squeezed in the clamp and if you push on the bolt while loosening, you can push the nut out of the clamp. Then you have to try to reach something around the turbo to hold the nut while you loosen the...

Paid Marin for a full Ecutek unlock, license and custom flex tune in late March. Heard nothing for a month except one 'he's really busy right now' message. Started a chargeback with ccard company. In a couple of days I got another message from Marin and Kat pleading with me to cancel the...

Thanks everyone for your replies - it is steel and double-walled.

I am pretty aware of what PDR can do and glue pulls and all, but I have a specific question about the rear fender/quarter panel metal.

Are the aluminum fenders above the rear wheels single or double layered? Can they do PDR from behind to fix a parking lot dent?

STO N SHO. Haven't scraped anything yet, but it does sit lower than the lip.

See if there is more error details in the Event Viewer. It might list the actual .DLL or .OCX file that it is having difficulty with. Start/Event Viewer/Windows Logs/Application then search for the Error.