Hey guys we have a track day coming up on Dec 10 at streets of willow clockwise. we have 50 spots total for the event so you will be getting plenty of seat time. the session is divided into 3 groups beginner, intermediate and advanced which is based off experience and lap times. early bird is...
Hey guys I just got two error codes out of the blue 101f01 and 190f08.
101f01 says throttle valve angle, intake manifold pressure limit and f08 is tank ventilation malfunction. From what I've read it's a leak in the vacuum system or as simple as a bad gas cap. Anyone have experience with this?
Hey guys I just installed SPL lower control arms, bumpsteer tie rods and front end links. After finishing up with the alignment took the car for a spin and I got a chassis stabilization error. I checked the ride height sensor it seems to be fine, I even used BM3 to scan the car and saw no error...
Hey guys we are doing a track day at streets of Willow June 18th 2021. A small event max 50 cars so you will get plenty of time behind the wheel. Me and my buddies have been doing these events for about 2 year, 145$ per driver. if you have any questions message me or my buddy on Instagram his...
my car is currently only using Eibach pro lowering springs. i just wanted to make sure that the front tires would be fit under there as it is lowered by 1.7 inches.
The 18 SM-10 are absolutely perfect! Is there an Estimate on when the SM-10 in 18 will be available.Have you had issues with rubbing with the 275 front and 295 rear setup its gonna be primarily a track wheel setup.
That's what I figured, almost no one has any information on it since most people aren't running them.
That's what I figured, almost no one has any information on it since most people aren't running them. I was looking at the TS2 as well hopefully the louvers will help remove the heat in the...
im looking to swap out the hood on my A90 with a Seibon carbon fiber food and I was Curious if anyone has input on the A90 hood latch setup. Since typically when you swap hoods to a lighter material you need to add pins to prevent the hood from flexing from the wind. Ive seen a couple guys run...
Its suppose to be a 1 piece, there was just confusion because the Z4 has 2 piece rotors on the M performance package. so it would have made sense for that to carry over to the Supra, and because of that people believed the Supra had 2 piece rotors because of that.
Yeah not a problem, if you have any questions feel free to ask. They most definitely dropped the ball on a few parts of the car but overall its a simple project so long as you plan it out before hand. it looks like the P3 tap is essentially the same as Vargas so it would work.
I am using R1 concepts drilled and slotted single piece rotors with G-lock pads, however my Factory rotors when i removed them were not two pieces it was a single piece OEM BMW rotor.