San Diego - Tire Shop Recommendations

[Nefarious]

Hi,

Any reputable tire shops in San Diego for recommending?
Just picket up some TE37s in 19x9.5 +23 fronts and 19x10.5 +35 rears and looking for a set of Michelin PS4S.
I was thinking of going with 265/35 for the front and 295/35 rear since I won't be lowering or installing coilovers.
Anyone know if this setup will rub or scrub?

Thank you!

Sponsored

 

[jb_mkv]

I'm no expert but I don't think that'll rub at all, especially if you aren't lowering. I currently run 275/35 front (PSS) and 295/35 (PS4S) rear with the same specs on Advan Beyonds. I'm lowered by approximately .5" from stock.

Sorry, don't have a place to recommend in SD since I live in OC.

 

[Nefarious]

I'm no expert but I don't think that'll rub at all, especially if you aren't lowering. I currently run 275/35 front (PSS) and 295/35 (PS4S) rear with the same specs on Advan Beyonds. I'm lowered by approximately .5" from stock.

Sorry, don't have a place to recommend in SD since I live in OC.

Thank you for chiming in!

 

[SooopraSD]

Whatever you do, DO NOT go to SD tire and wheel in Kearny Mesa. They jacked up an old set of Work wheels I had. JBA Motorsport uses a touch less tire machine so I have been going there instead.

 

[Nefarious]

Whatever you do, DO NOT go to SD tire and wheel in Kearny Mesa. They jacked up an old set of Work wheels I had. JBA Motorsport uses a touch less tire machine so I have been going there instead.

I'm sorry to hear that happened and appreciate good looking out! I'll ahead and give JBA Motorsport a call, thanks again!

 

[swrdply400mrelay]

I'm no expert but I don't think that'll rub at all, especially if you aren't lowering. I currently run 275/35 front (PSS) and 295/35 (PS4S) rear with the same specs on Advan Beyonds. I'm lowered by approximately .5" from stock.

Sorry, don't have a place to recommend in SD since I live in OC.

You have pics of your set up? What springs are you running?

 

[Nefarious]

You have pics of your set up? What springs are you running?

Will be putting on TE37s in 19x9.5 +23 fronts and 19x10.5 +35 rears with a set of Michelin PS4S.
No pics so far, still waiting on the rims so just plain old stock look for now..
Thinking of going with 265/35 for the front and 295/35 rear
Not going to be lowering the car so no need for lowering springs or coilovers, those days with negative cambers are done lol

 

[jb_mkv]

You have pics of your set up? What springs are you running?

Yep, here are a couple pictures. I’m running the HKS height adjustable springs right now. I think the default drop on these is 1” front and .8” rear, but I got the car raised about .3” several months later. During the time I was running with default drop, I never experienced any rubbing. The Michelins are pretty stretched so maybe that helps too.

I know some guys that run lower than I do with same specs and never had issues either. I think you guys will be fine.

,

 

[MKV.CORN]

Will be putting on TE37s in 19x9.5 +23 fronts and 19x10.5 +35 rears with a set of Michelin PS4S.
No pics so far, still waiting on the rims so just plain old stock look for now..
Thinking of going with 265/35 for the front and 295/35 rear
Not going to be lowering the car so no need for lowering springs or coilovers, those days with negative cambers are done lol

275/35 front and 305/35 rear. You’ll never regret it. No rubbing

Sponsored