19" Work Zistance W5S

[PREDATOR786]

Hi all.

I recently had these Work wheels installed on my A90 and thought I'd share these images with you guys.

Sponsored

 

[SooopraSD]

Love that lip on the rear!

 

[Cherry]

Those look incredible. Where'd you get them from and how much did they run you?

 

[PREDATOR786]

Those look incredible. Where'd you get them from and how much did they run you?

Thanks! The Work agent here had a set in stock (I'm from South Africa).

At the current exchange rate, I'd say about USD 3200.

 

[RyanA90]

Specs?

 

[PREDATOR786]

Specs?

Front: 19x10J +18
Rear: 19x11J +35

OEM tires because they've got less than 6000km on em.

OEM height until I level out the entrance to my garage.

 

[OHB]

Those wheels look so sickkk bro. Strange not many Supra owners run these! I am definitely getting those after seeing this post!

Can you also share your wheel disk specs for the front and rear?

And if you have any pics of it when lowered?

 

[mdpalmer]

Sheesh those look amazing! I dont remember seeing these on an A90 before. I see that lip going into the garage I have felt your struggle before

That front spec seems pretty aggressive, any issues with fender lip clearance?

 

[PREDATOR786]

Those wheels look so sickkk bro. Strange not many Supra owners run these! I am definitely getting those after seeing this post!

Can you also share your wheel disk specs for the front and rear?

And if you have any pics of it when lowered?

Thanks.

Fronts are R disc
Rears are W disc

Still haven't had a chance to lower it.

 

[PREDATOR786]

Sheesh those look amazing! I dont remember seeing these on an A90 before. I see that lip going into the garage I have felt your struggle before

That front spec seems pretty aggressive, any issues with fender lip clearance?

Yeah I wanted Meisters initially but there were quite a few Supras running them already so went with these instead.

If I were to do it over, I'd probably go with a 22 offset at the front instead of the 18.

Currently, since I'm still on the OEM 255 tires and stock height, there's no clearance issues whatsoever.

They don't rub at all even with aggressive driving.

I may have to add a bit of negative camber though when I eventually lower it and go with a meatier tire setup.

 

[OHB]

Thanks.

Fronts are R disc
Rears are W disc

Still haven't had a chance to lower it.

I contacted WORK USA and they recommended 19x9.0 +26 S-Disk / 19x10.0 +35 W-Disk

Definitely not the setup I am looking for, these wheel widths are too narrow for me. But what confuses me the most is the disks. I believe R-Disk will have a shallower lip than S-Disk while W-Disk has a deepest lip am not wrong.

I am settling on 19x9.5 +25 and 19x11 +38 but still confused about what disk spec, i.e urs or what WORK recommended
I wanna do 19x10 +30 fronts but worried the backspace won't clear since it will go 10.5mm deeper on the inner side. Not sure how much extra inner space we can go from the stock wheels. I am using this website for these calculations:
https://cosmisusa.com/pages/wheel-offset-calculator

Would love to hear you opinion

 

[SupraTR]

I'm loving these. Was likely going the typical Apex/Titan route but I've loved Work wheels since my 300zx days and just haven't seen many examples I liked on a Supra. Old thread clearly but curious if fat tires ever ended up on those wheels.
Main issue with Work wheels is the price is a bit hard to swallow compared to Apex/Titan...

 

[PREDATOR786]

I contacted WORK USA and they recommended 19x9.0 +26 S-Disk / 19x10.0 +35 W-Disk

Definitely not the setup I am looking for, these wheel widths are too narrow for me. But what confuses me the most is the disks. I believe R-Disk will have a shallower lip than S-Disk while W-Disk has a deepest lip am not wrong.

I am settling on 19x9.5 +25 and 19x11 +38 but still confused about what disk spec, i.e urs or what WORK recommended
I wanna do 19x10 +30 fronts but worried the backspace won't clear since it will go 10.5mm deeper on the inner side. Not sure how much extra inner space we can go from the stock wheels. I am using this website for these calculations:
https://cosmisusa.com/pages/wheel-offset-calculator

Would love to hear you opinion

Those are weak specs - same width as OEM.

If you're going 10j in front I wouldn't advise a 30 offset though.

The dealer I got my set from told me he spec'd the rear to get the most lip.

 

[PREDATOR786]

I'm loving these. Was likely going the typical Apex/Titan route but I've loved Work wheels since my 300zx days and just haven't seen many examples I liked on a Supra. Old thread clearly but curious if fat tires ever ended up on those wheels.
Main issue with Work wheels is the price is a bit hard to swallow compared to Apex/Titan...

Still rocking the OEM tires. Car has only done about 1000km since this initial post.

 

[Meraki Autoworks]

Looks good.

-Josh

Sponsored